|
 |
SERIES BELT SAMPLER |
| |
Introducing JBLCo’s newly designed product sampler, the QC-360. This quality control sampler, developed primarily for the Aggregate Industry, will allow for the collection of reliable results for quality control purposes. |
| |
|
| |
The QC-360 primary sampler is a top-of-the-belt sweep sampler designed to mount to the top chord of the conveyor. The sampler removes each sample increment from the loaded, moving conveyor with a single 360° rotation of an open faced Sweep (or cutter) in a plane perpendicular to material flow. Sample increments are discharged from the Divider/Sweep into a discharge section of the primary housing and pass from there via gravity to a sample collection point. |
| |
|
| |
|
| |
 |
|
 |
|
|
| |
Features of the QC-360: |
| |
|
| |
 |
Central lubrication |
|
| |
|
Low maintenance / Few moving parts |
|
| |
|
Low maintenance / Few moving parts |
|
| |
|
Save time and money by keeping your conveyor on the move |
|
| |
|
Backed by full time Sales, Engineering, Service & Parts Departments |
|
| |
|
|
|
| |
|
| |
|
| |
 |
Base Machinery Includes: |
| |
| |
Primary Housing. The primary housing is fabricated from high strength steel. The discharge side of the primary housing has a rectangular opening. Optional Discharge chute adapters, either 12” round pipe, 12” square chute or 8” round for bag attachment, can be attached and are offered as available options.
|
| |
|
| |
Divider/Sweep. The sweep (cutter) is fabricated from high strength steel. The assembly has an adjustable and replaceable polyurethane wiper. (Standard Cutter Widths 3”, 6”, 9”, 12”, and 15”)
|
| |
|
|
| |
Drive Assembly. The standard drive assembly includes a TEFC motor with electric drive integral mounted gear reducer. It is designed to produce an average speed of approximately 140 inches per second. |
| |
|
|
| |
Alarm Horn & Junction Box. The horn and NEMA 4 junction box are mounted on the primary sampler housing. |
| |
|
| |
Primary Discharge Chute. Sample increments obtained by the sampler exit the primary housing through a rectangular opening designed to mate with plastic pipe and/or customer collection station. Any downtube or collection device must be supported. |
| |
|
| |
Gray Paint Scheme. |
| |
|
| |
Operating & Maintenance Manuals. One (1) Operating & Maintenance Manual is included with each sampler. It contains Installation Instructions, Operational Procedures, Maintenance and Spare Parts lists along with mechanical & electrical drawings. |
| |
|
| |
|
| |
|
Options |
QC360 Brochure (PDF) |
Request for Quote |
|
|
|
Aggregate Sampling 